Faygo high speed pet bottle blowing machine with good quality
Faygo Union Packaging Machinery Co., Ltd. is a professional enterprise which integrates designing, manufacturing and offering the turn-key project to our partners.
For decades, Faygo Union has dedicated herself to the packaging machinery of water, beverage, daily use chemical and edible oil. We have supplied over 70 countries and regions with the following products: air compressors, PET blowing machine, water treatment, washing-filling-capping assembly line and barreled drinking water assembly line.
Advantages:
1 High speed with reasonable structure:
The unique linkage cam can finish mold-opening, mold-locking and bottom mold-elevating in one movement, the blowing period is greatly reduced to 2 seconds.
The linkage cam is intelligently driven by one servo motor, this obviously simplify the blowing machine structure, which make it convenient to maintain and no need for heavy lubrication work.
2 Less heating oven, small electricity consumption
The preforms distance in the heating oven is only 38.1mm, which means more preforms can be put into the oven compared with the traditional blowing machine. The heating efficiency is largely improved, and as a result, it saves more than 30% electricity consumption than the traditional blowing machine.
3 Stably running
The machine adopts modularized design concept, it has compact and reasonable structure, it reduces the failure rate from the basic design angle. FG4 does not need the low air compressor.
Servo driving and cam linking blowing section:
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.
equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
Small performs distance heating system:
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
Efficient and soft perform inlet system:
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecte
Modularized design conception:
Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
FG Series Optional items:
Exploded bottles ejection unit:
During the blowing process, if the bottle burst, bad bottles can be automatically removed.
This prevents the bad bottles from entering the filling machine.
HP air recovery system:
After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
Oven and preform temperature detection system:
Detection system detects temperature of oven and the temperature of performs.
When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.
Equipped with remote monitoring system:
Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.
Detail specification of FG-4 PET bottle blowing machine
Main Parameter |
| Model |
FG-4 |
| Capacity |
Depend on bottle design |
5500-7200PCS/H |
| Applicable Preform |
Height |
<330mm |
| Neck |
20mm-25mm |
| Applicable Bottle |
Neck |
20-25mm |
| Volume |
Max.2Liter |
| Height |
Max.328mm |
| Diameter |
Max.105mm |
| Electric consumption |
Install power |
51kw |
| Heating oven powder |
46kw |
| Heating Oven operating power |
26kw |
| Air consumption |
Pressure |
4m3/min 4.0MPa |
| Capacity |
4m3/min 4.0MPa |
| Mold Chiller |
Pressure |
4-6Bar |
| Temperature |
6-13ºC |
| Flow |
45L/min |
| Oven Chiller |
Pressure |
4-6Bar |
| Temperature |
6-13ºC |
| Flow |
26L/min |
| Machine Dimension |
L*W*H |
3900*900*2500mm |
| Weight |
3500kg |
| Capacity: 5000-5500BPH(based on 1L) |
Max. Volume: 2 Litter
Total Size:
Blowing Main machine: 3.6*1.3*2.3m
Sorting machine:2*1.5*1.5m/Loader:3*1*1.5m |
Main electrics |
| Pneumatic part& Cylinder |
Valve |
GERMAN |
| Electric part |
PLC |
JAPAN Mitsubishi |
| Servo System |
JAPAN Panasonic |
| Frequency inverter |
JAPAN Mitsubishi |
| Operating system |
JAPAN Mitsubishi |
| Touch screen |
JAPAN Mitsubishi |
| Blowing |
Valve |
JAPAN Parker |
| One-way Valve |
GERMAN |
| Throttle Valve |
GERMAN |
| Reducing Valve |
GERMAN DURAY |
Note: All the electrical components adopts CE,UL,CCC approved international
advanced high-tech product |
Q: Your company is a transactional company or an industrial manufacture factory?
A: We are an industrial manufacture factory which locates in Zhangjiagang city.
Q: All of your products are made by your self or compacted via purchasing the others?
A: We have independent technical team who focus on making machines, all the products are made by our technical team.
Q: What is the ability of your factory?
A: About 100 lines per month.
Q: Do you have any other services about your products?
A: We have a lot of experience on making projects and specifications for our clients, also we have a fixed service system.
Q: How do you make the quotation for clients?
A: The price depends on quality and performance but the clients should be satisfied first.
){kind=link}