New Generation PET Bottle Blowing Machine
I. Each Year, We Guarantee Your Bottle Making Factory:
1) Output increased by 50%
2) Waste bottle rate below 0.3%
3) 20,000USD saved by power consumption
4) blowing machine maintain cost below 800USD
Pet Bottle Blowing Machine 6cavity 9000-10000bph
Specifications
1.Model: FG-6
2.Capacity:9000-10000B/H
3.Bottle type:200ml-2000ml
FG-6 PET bottle blowing machine
| Main Parameter |
| Model |
FG-6 |
| Capacity |
Depend on bottle design |
9000-10000PCS/H(@500ml, 17g bottles) |
| Applicable Preform |
Height |
<330mm |
| Neck |
20mm-38mm |
| Applicable Bottle |
Neck |
20-25mm |
| Volume |
Max. 2Liter |
| Height |
Max. 328mm |
| Diameter |
Max. 105mm |
| Electric consumption |
Install power |
51kw |
| Operating power |
30kw |
| Air consumption |
Pressure |
3.0MPa |
| Capacity |
6m3/min |
| Mold Chiller |
Pressure |
4-6Bar |
| Temperature |
6-13ºC |
| Flow |
45L/min |
| Oven Chiller |
Pressure |
4-6Bar |
| Temperature |
6-13ºC |
| Flow |
26L/min |
| Machine Dimension |
L*W*H |
4300*1000*2300mm |
| Weight |
4000kg |
| Main electrics |
| Pneumatic part& Cylinder |
Valve |
Germany FESTO |
| Electric part |
PLC |
Japan Mitsubishi |
| Servo System |
Japan Panasonic |
| Frequency inverter |
Japan Mitsubishi |
| Operating system |
Japan Mitsubishi |
| Touch screen |
Japan Mitsubishi |
| Blowing |
Valve |
Japan Parker |
| One-way Valve |
German FESTO |
| Throttle Valve |
German FESTO |
| Reducing Valve |
German DURAY |
Note: All the electrical components adopts CE, UL, CCC approved international
Advanced high-tech product |
I. Brief Introduction:
FG is the new generation of linear blowing machine. Comnpared with traditional blowing machine, It has 3 improvement:
1)High speed: China first blowing machine whose single mold speed can reach 1800 BPH. FG4 has 4 cavities, production speed is 6500-7200BPH. FG6 has 6cavity, speed is 9000-10000bph. FG8 is 8cavity, speed is 12000-13000bph
2) Energy saving: It has only 2 lamp boxes( based on 4cavity), at least 20000USD can be saved per year, electrical ammeter is equipped, you can know how much every single bottle costs you.
3) High Reliability: Machine adopts modularized design principle, the movement is integrated in 3 sets servo motor, which promises this machine will have good condition under full load operation.
II. Technical Features:
1. Servo driving and cam linking movement blowing section:
The unique cam linking system integrates mold-opening, mold-locking and bottom mold-evevating in one movement, equipped with high speed servo motor, which greatly shortens the blowing cycle and accelerates the spped.
2. Minimize distance of heating heads,maximize the heating efficiency.
Heater distance in the heating oven is minimized to 38.1mm, compared with the conventional heating oven it can save more than 30% consumption.Equipped with the air cycling system and redundant heating discharge system it ensures constant temperature in the heating zone.
3. Efficient and soft perform inlet system,ensure the spped and preform protction.
By rotary and soft preform loading system, the speed of preform feeding is ensured, meanwhile, the preform neck is well protected.
4. Modularized design conception, convenient for maintenance and changing changeovers
The machine adopts modularized design concept to make it convenient and cost-saving for the maintenance and changing changeovers.
III.After sale Services
1) Stand-by engineers team to provide overseas installation and commissioning service.
2) 1 year warranty. During warranty, we provide free of charge for repairing cost.
3) Lifetime maintenance. After-sales department can provide life long maintenance service.
Servo driving and cam linking blowing section:
The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.
equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.
Small performs distance heating system:
Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.
Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.
Efficient and soft perform inlet system:
By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecte
Modularized design conception:
Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.
FG Series Optional items:
Exploded bottles ejection unit:
During the blowing process, if the bottle burst, bad bottles can be automatically removed.
This prevents the bad bottles from entering the filling machine.
HP air recovery system:
After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
Oven and preform temperature detection system:
Detection system detects temperature of oven and the temperature of performs.
When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.
Equipped with remote monitoring system:
Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.
Jiangsu Faygo Union Machinery is a professional manufacturer of plastic machines.
It occupied an area of 18000 square meters. With years of development,
its products covers plastic extrusion lines, plastic blowing machine, plastic recycling machine, air compressor etc.
Stick to the company idea is making good machine, being good person,
Faygo Plast alwasy provide customers with high quality machines.
Warmly welcome to visit our factory (next to Shanghai)!
Q: Your company is a transactional company or an industrial manufacture factory?
A: We are an industrial manufacture factory which locates in Zhangjiagang city.
Q: All of your products are made by your self or compacted via purchasing the others?
A: We have independent technical team who focus on making machines, all the products are made by our technical team.
Q: What is the ability of your factory?
A: About 100 lines per month.
Q: Do you have any other services about your products?
A: We have a lot of experience on making projects and specifications for our clients, also we have a fixed service system.
Q: How do you make the quotation for clients?
A: The price depends on quality and performance but the clients should be satisfied first.
){kind=link}