6 Cavity 10000 Bottles Per Hour/Easy Operation Pet Bottle Blowing Machine

Product Description

Product Description

We supply upgrading solution for your factory, double output, half reduce power

1) waste bottle rate below 0.3%

2) small heating zone, save 20000USD electricity power one year
3) servo motor drive, machine maintain cost below 800USD each year.

4) change bottle mold within 20minutes

It is the most stable two-step automatic stretch blow moulding machine.It has four cavities and the maximum capacity of the products is 2L.The capacity can be 6800-7200BPH, It can blow bottles in shapes:Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET etc.

Product Parameters

Model			FG4	FG6	FG8	Remark
Mold number(piece)			4	6	8
Capacity(BPH)			6500~8000	9000~10000	12000~13000
Bottle specification	Max volume(mL)		2000	2000	750
	Max height(mm)		328	328	328
	Round bottle max diameter(mm)		105	105	105
	Square bottle max diagonal(mm)		115	115	115
Preform specification	Suitable inner bottle neck(mm)		20--25	20--25	20--25
	Max preform length(mm)		150	150	150
Electricity	Total installation power(kW)		51	51	97
	Heating oven real power(kW)		25	30	45
	Voltage/frequency(V/Hz)		380(50Hz)	380(50Hz)	380(50Hz)
Compressed air	Pressure(bar)		30	30	30
Cooling water	Mold water	Pressure(bar)	4-6	4-6	4-6	Water chiller (5HP)
		Temperature regulation range(°C)	6--13	6--13	6--13
	Oven water	Pressure(bar)	4-6	4-6	4-6	Water chiller (5HP)
		Temperature regulation range(°C)	6-13	6-13	6-13
Machine specification	Machine dimension(m)(L*W*H)		3.3X1X2.3	4.3X1X2.3	4.8X1X2.3
	Machine weight(Kg)		3200	3800	4500

Main electrics
Pneumatic part& Cylinder	Valve			GERMAN FESTO
Electric part	PLC			JAPAN Mitsubishi
	Servo System			JAPAN Panasonic
	Frequency inverter			JAPAN Mitsubishi
	Operating system			JAPAN Mitsubishi
	Touch screen			JAPAN Mitsubishi
Blowing	Valve			JAPAN Parker
One-way Valve				GERMAN FESTO
Throttle Valve				GERMAN FESTO
Reducing Valve				GERMAN DURAY

Note: All the electrical components adopts CE,UL,CCC approved international advanced high-tech product

Product Details

 

Servo driving and cam linking blowing section: 

The unique cam linking system integrates movement of mold-opening, mold-locking and bottom mold-elevating in one movement.

equipped with high speed servo driving system which greatly shorten the cycle of blowing and increase the capacity.

Small performs distance heating system:

Heater distance in the heating oven is reduced to 38mm, compared with the conventional heating oven it saves more than 30% electricity consumption.

Equipped with the air cycling system and redundant heat discharge system, it ensures the constant temperature of the heating zone.

Efficient and soft perform inlet system:

By rotary and soft preform inlet system, the speed of prefom feeding is ensured meanwhile, the preform neck is well protecte

Modularized design conception:

Adopting modularized design concept, to make it convenient and cost-saving for the maintenance and changing spare parts.

FG Series  Optional items:

Exploded bottles ejection unit:

During the blowing process, if the bottle burst, bad bottles can be automatically removed.

This prevents the bad bottles from entering the filling machine.

HP air recovery system:

After the bottle blowing, high-pressure air can be recycled and used again for the pre-blowing and machine physical movement.
 

Oven and preform temperature detection system:

Detection system detects temperature of oven and the temperature of performs.

When the preform temperature does not reach the set blowing temperature, blowing workstation will alarm, not blown.

 

Equipped with remote monitoring system:

Engineers in China headquarter can check the data collected and sent by the PLC anytime with the mobile ,feedback will informed to  the client's site if something abnormal ,give the machine 24 hour'baby care in the cradle.

 

 

 

Type			FG4
Specifications of bottle	Mould number(piece)		4
	maxi volume (mL)		2000
	maxi height (mm)		328
	maxi diameter (mm)		105
	Square bottle for max diagonal length (mm)		115
preform Specifications	Suitable inner bottle neck (mm)		20-25
	preform max length (mm)		150
Capacity (bottles / hour) at 17 g 500mL			7200
Electricity	Install power (kw)		51
	Heating oven total power (kw)		46
	Heating oven actual power consumption (kw)		26
	Voltage / frequency (V / Hz)		380v,50hz
	Allowed voltage fluctuation		±10%
HP Air	Pressure(bar)		30
	Capacity(m³/min)		4
Cooling Water	Mold water	pressure(bar)	4-6
		Suitable temperature range (ºC)	6-13
		Flow (L / min)	45
	Oven water	pressure(bar)	4-6
		Suitable temperature range (ºC)	6-13
		Flow (L / min)	22
Machine Specification	host machine dimension (m)  length × width × height		3.3*1*2.3
	Weight (Kg)		3200

 
 

 

 is a professional manufacturer of plastic machines.
It occupied an area of 18000 square meters. With years of development,
its products covers plastic extrusion lines,plastic blowing machine, plastic recycling machine, air compressor etc. 

Stick to the company idea is making good machine, being good person,
Faygo Plast alwasy provide customers with high quality machines.

Warmly welcome to visit our factory (next to Shanghai)!

FAQ

Q: Your company is a transactional company or an industrial manufacture factory?
A: We are an industrial manufacture factory which locates in Zhangjiagang city.

Q: All of your products are made by your self or compacted via purchasing the others?
A: We have independent technical team who focus on making machines, all the products are made by our technical team.

Q: What is the ability of your factory?
A: About 100 lines per month.

Q: Do you have any other services about your products?
A: We have a lot of experience on making projects and specifications for our clients, also we have a fixed service system.

Q: How do you make the quotation for clients? 
A: The price depends on quality and performance but the clients should be satisfied first.